Downloads & Documentation
HV 1
Vibration motors, standard execution
Threephase Vibration Motor
The sturdy housing is manufactured from aluminium chill casting. The amply dimensioned bearings 6302 ZZ C4 are lubricated for life. The centrifugal force can be changed stepwise by taking off the eccentric weights. The vibrator can be run continously with all the eccentric weights mounted, under consideration of the admissible power consumption.Standard voltage: 230/400 vs. 50 cps. Other voltages are available.
For operation with 230 vs.-A.C.power supply source an operating capacitor of 4µF can be delivered
Type of protection IP 65 · Insulant class F
All HV 2 rotary current units can be delivered also in protection class ATEX
II 3G/D T3. See HVe
1
Overview
| Line | Model | Synchr. speed | Centrifugal force | Workingmoment | Centrifugal forcesettings | Stand. voltage | Nominal current | Power input | Offering |
|---|---|---|---|---|---|---|---|---|---|
| min.-1 | daN | cm kg | Number of slices per page | 50 Hz / V | A | P1, W | |||
| 1 | HV 1/2 | 3000 | 50 | 1 | in stages 5  |
3 ~ 230/400 | 0,30/0,17 | 95 | Request |
| 2 | HV 1/4 | 1500 | 12,5 | 1 | in stages 5 |
3 ~ 230/400 | 0,26/0,15 | 60 | Request |
| 3 | HV 1/4-3 | 1500 | 42,5 | 3,4 | in stages 17 |
3 ~ 230/400 | 0,26/0,15 | 60 | Request |
Dimensions
| Model | Bores for fastening1 | Base measurements (mm) | Outside measurements (mm) | Mass | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| a | b | Øs | c | e | f | h | g | p | k | kg | ||||
| HV 1/2 | 60 | 100 | 9,5 | 25 | 85 | 120 | 70 | 80 | 110 | 170 | 3,6 | |||
| HV 1/4 | 65 | 85 | 9,5 | 25 | 85 | 120 | 70 | 80 | 110 | 170 | 3,6 | |||
| HV 1/4-3 | 25 | 85 | 120 | 70 | 80 | 110 | 237 | 4,0 | ||||||
1 All mentioned fastening holes are provided in the unit.
