Downloads & Documentation
HV 15
Vibration motors, standard execution
Threephase Vibration Motors
The extremely sturdy housing is manufactured from highly resistant, heat treated aluminium chill casting. The bearings TMB 305 C4 and NJ 2305 E C4 which are lubricated with special grease, make sure impeccable operation for a long time. The centrifugal force can be changed stepwise by taking off the eccentric weights. The vibrator can be run continuously under consideration of the admissible power input.Standard voltage: 230/400 vs. 50 cps. Other voltages are available.
Type of protection IP 65 · Insulant class F
Overview
| Line | Model | Synchr. speed | Centrifugal force | Workingmoment | Centrifugal forcesettings | Stand. voltage | Nominal current | Power input | Offering |
|---|---|---|---|---|---|---|---|---|---|
| min.-1 | daN | cm kg | Number of slices per page | 50 Hz / V | A | P1, W | |||
| 1 | HV 15/2 | 3000 | 750 | 15 | in stages 10  |
3 ~ 230/400 | 2,16/1,25 | 650 | Request |
| 2 | HV 15/2-20 | 3000 | 1050 | 21 | in stages 14 |
3 ~ 230/400 | 2,7/1,55 | 900 | Request |
| 3 | HV 15/2-25 | 3000 | 1260 | 25 | in stages 10 |
3 ~ 230/400 | 2,7/1,55 | 900 | Request |
Dimensions
| Model | Bores for fastening | Base measurements (mm) | Outside measurements (mm) | Mass | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| a | b | Øs | c | e | f | h | g | p | k | kg | ||||
| HV 15/2 | 100 | 180 | 18 | 40 | 140 | 215 | 70 | 175 | 138 | 303 | 16,3 | |||
| HV 15/2-20 | 100 | 180 | 18 | 40 | 140 | 215 | 70 | 175 | 138 | 350 | 18 | |||
| HV 15/2-25 | 100 | 180 | 18 | 50 | 140 | 215 | 80 | 186 | 159 | 330 | 19 | |||
