Downloads & Documentation
HV 8
Vibration motors, standard execution
Threephase Vibration Motors
The extremely sturdy housing is manufactured from highly resistant, heat treated aluminium chill casting. The bearings NJ 2304 C4 are lubricated with special grease, i.e. UNIREX N3, make sure an impeccable function and long life. The centrifugal force can be changed by means of mountable eccentric weights. The vibrator can be run continously with all the eccentric weights mounted, under consideration of the admissible power input.*An exeption is Typ HV 8/2-11. This unit is a special execution and should be used only with storage bins for facilitating the delivery. Mounted bearings: 6303 2Z C4 are lubricated for life.
Standard voltage: 230/400 vs. 50 cps. Other voltages are available.
Type of protection IP 65 · Insulant class F
Overview
| Line | Model | Synchr. speed | Centrifugal force | Workingmoment | Centrifugal forcesettings | Stand. voltage | Nominal current | Power input | Offering |
|---|---|---|---|---|---|---|---|---|---|
| min.-1 | daN | cm kg | Number of slices per page | 50 Hz / V | A | P1, W | |||
| 1 | HV 8/2 | 3000 | 420 | 8,4 | in stages 11  |
3 ~ 230/400 | 1,65/0,95 | 540 | Request |
| 2 | HV 8/2-11* | 3000 | 535 | 10,7 | in stages 14 |
3 ~ 230/400 | 1,65/0,95 | 540 | Request |
Dimensions
| Model | Bores for fastening | Base measurements (mm) | Outside measurements (mm) | Mass | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| a | b | Øs | c | e | f | h | g | p | k | kg | ||||
| HV 8/2 | 100 | 180 | 18 | 35 | 130 | 210 | 65 | 165 | 124 | 288 | 12,0 | |||
| HV 8/2-11 | 100 | 180 | 18 | 35 | 130 | 210 | 65 | 165 | 124 | 275 | 11,5 | |||
